Part No.
Weight
Description
Silver Copper
Braze 450 General purpose filler metal
for joining ferrous, non-ferrous and dissimilar
metals with large joint clearance.
98001 (76313)
3 oz.
1/16" Dia.
45%
30%
98000 (76310)
1 oz.
1/16" Dia.
45%
30%
Braze 452 (Orange) Flux Coated
98100 (76224)
4 oz.
1/8”x18"
45%
27%
Orange
Braze 505 (Blue) Best general filler metal available.
Great for stainless steel as it retards interface corrosion.
Nickel content provides superior adhesion to base metal surfaces.
98110
4 oz.
1/8” x 18"
50%
20%
Flux Coated
99076
8 Rods
.075”x 20",
50%
20%
Flux Cored
98071
3 oz.
1/16" Dia.
50%
20%
98070
1 oz.
1/16" Dia.
50%
20%
Braze 560 (Yellow) Lowest temperature,
Cadmium-free filler metal, very fluid alloy flow.
98120 (75224)
4 oz.
1/8”x18"
56%
22%
Flux Coated
99084
8 Rods
.075”x 20"
56%
22%
Flux Cored
98061
3 oz.
1/16" Dia.
56%
22%
98060
1 oz.
1/16" Dia.
56%
22%
Sil-Fos 15 Best alloy for general copper-copper brazing in the Sil-Fos family.
For brass applications flux is recommended. Slow flow.
95150 (61035)
1 lb.
.050”x 20"
15%
80%
95177 (61039)
8 Rods
.050”x 20"
15%
80%
Sil-Fos 5 Designed primarily for those applications where close fit-ups
cannot be maintained. It has the ability to fill gaps & form fillets
w/o adversely affecting joint strength. Slow flow.
95060 (41035)
1 lb.
.050”x 20"
5%
89%
95082
8 Rods
.050”x 20"
5%
89%
Fos Flo 7 An economical, very fluid medium temperature filler metal for use
with copper, brass and bronze. Withstands moderate vibration. Fast flow.
95000 (21035)
1 lb.
.050x20"
0%
92.8%
97030
Handy Flux All-purpose, low temp. flux for brazing both ferrous & non-
ferrous metals & alloys. Temp. protection up to 1600ºF.
7 oz. jar
97000
Handy Flux Type TEC Widely used soldering flux provides excellent
performance for applications in the 400º - 800ºF range. Recommended for solder -
ing stainless.
4 oz. squeeze bottle
97020
Clean ‘n Brite Flux General purpose solder flux provides temperature
protection up to 550ºF.
4 oz. jar
SOLDER, FLUXES, BRUSHES & ACCESSORIES
SA12 (70164)
• 120 Grit • 10 Yards
• Cleans Faster
• Lasts Longer
• Handles Easier
• Completely Water Resistant
SILVER SOLDER (Lead & Cadmium Free)
Rod
Solder
Coiled
Solder
Call For
Current Pricing
ABRASIVE CLOTH
Handy Plumbers Roll
Grade No. 1 Sand Cloth
ACID BRUSH
70210
Used for application of solder
pastes, flux, teflon solvents.
Part numbers and illustrations are for identification only
© 1971-2010 w.d. armstrong corp.
32
Clean 'n Brite
No Lead
Silver-bearing solder
used in potable water
system applications
requiring no lead.
1 lb. spool
96150
Heat absorbing paste
Prevent damage
THERMO-TRAP®
4371-36 11 oz. Tube
Clean 'n Brite 6
Lead-free, silver
bearing (6%) high
strength solder for
applications requiring
large joint clearances.
96010
